| Customization: | Available |
|---|---|
| Standard Or Nonstandard: | Standard |
| Shaft Hole: | 3-38 |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
GSJ 68x53 Aluminum alloy single diaphragm set screw coupling
| model parameter | common bore diameter d1,d2 | ΦD | L | LF | S | F | M | tightening screw torque (N.M) |
| GSJ-19x20 | 3,4,5,6.6.35,7,8,9,9.525.10 | Φ19 | 20 | 9.1 | 1.8 | 4.25 | M3 | 0.7 |
| GSJ-26x24 | 4,5,6,6.35,7,8,9,9.525,10,11,12 | Φ26 | 24 | 10.7 | 2.6 | 4.5 | M4 | 1.7 |
| GSJ-32x29 | 6,6.35,7,8,9,9.525,10,11,12,12.7,14,15,16 | Φ32 | 29 | 12.75 | 3.5 | 6.12 | M4 | 1.7 |
| GSJ-39x34.5 | 6,6.35,7,8,9,9.525,10.11.12,12.7,14.15,16,17,18 | Φ39 | 34.5 | 15 | 4.5 | 6.62 | M5 | 4 |
| GSJ-44x41 | 8,9,9.525,10,11,12,12.7,14,15,16,17,18,19,20,22 | Φ44 | 41 | 18.25 | 4.5 | 8.12 | M6 | 8.4 |
| GSJ-56x45 | 8,10,12,12.7,14,15,16,17,18,19,20,22,24,25,28,30,32 | Φ56 | 45 | 19.75 | 5.5 | 6.4 | M8 | 8.4 |
| GSJ-68x53 | 12,14,15,16,17,18,19,20.22,24,25,28,30,32,35,38 | Φ68 | 53 | 23.35 | 6.3 | 7.7 | M8 | 10.5 |
| Anodizing treatment | Rated torque (N.M)* |
allowable eccentricity (mm)* |
allowable deflection angle (°)* |
allowable axial deviation (mm)* |
maximum speed rpm |
static torsional stiffness (N.M/rad) |
moment of inertia (Kg.M2) |
Material of shaft sleeve | Material of shrapnel | surface treatment | weight (g) |
| GSJ-19x20 | 1 | 0.1 | 1° | ±0.09 | 10000 | 220 | 6.5x10-1 | High strength aluminum alloy | S U S 3 0 4 Spring steel | Anodizing treatment | 10 |
| GSJ-26x24 | 1.5 | 0.1 | 1° | ±0.14 | 10000 | 1125 | 1.8x10-6 | 23 | |||
| GSJ-32x29 | 2 | 0.1 | 1° | ±0.18 | 10000 | 2100 | 5.2x10-5 | 50 | |||
| GSJ-39x34.5 | 6 | 0.1 | 1° | ±0.23 | 10000 | 3900 | 2.0x10-6 | 80 | |||
| GSJ-44x41 | 9 | 0.1 | 1° | ±0.27 | 10000 | 4500 | 3.2x10-6 | 155 | |||
| GSJ-56x45 | 25 | 0.1 | 1° | ±0.36 | 10000 | 12900 | 1.2x10-4 | 217 | |||
| GSJ-68x53 | 60 | 0.1 | 1° | ±0.4 | 8000 | 25800 | 1.5x10-4 | 348 |
){kind=link}