Customization: | Available |
---|---|
Model: | Mz45 Cam Clutch |
Type: | Sprag |
Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
---|
Payment Methods: |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
---|---|
Support payments in USD |
Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
---|
Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
---|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
MZ45 One Way Self-Contained Sprag Type Freewheel Backstop Clutch
Description of MZ45 Cam Clutch Backstop for Cement Hoist
1. MZ Series Cam Clutch is Shielded by shield bearings on both ends, packed with a special grease, and are ready for use. No additional lubricant is required.
2. For attaching pulleys, gears or sprockets to the clutches, insert hubs (with f7 tolerance of ISOR773) along the inner surface of the outer race and screw the bolts (high tension) into the tapped holes on the clutch end.
3. Recommended shaft tolerances are shown in the table on the lower left.
4. External thrust load should be supported by other devices, not by the Cam Clutch.
5. Use only a parallel key to secure the clutch to the shaft. Do not use a tapered Key.
6. When mounting the clutch onto the shaft, apply pressure to the inner race but never to the outer race.
Data sheet of MZ45 Cam Clutch Backstop for Cement Hoist
Model | MZ45 | |
Torque (Nm) | 1620 | |
Overrunning Speed (r/min) | Inner race | 1400 |
Outer race | 300 | |
Bore Size (mm) | 45 | |
Outer Race Size (mm) | 125 | |
Thickness (mm) | 92 | |
Weight (Kg) | 6.2 |
Parameter of MZ45 Cam Clutch Backstop for Cement Hoist
Model | Capacity Torque | Drag Torque |
Overrunning
Speed (r/min)Max
|
indexing Max. |
Bore Size |
Keyway
|
A | B | C | PCDD |
E (M6) |
F | G |
H-M No. of Tapped xHoles Size × Pitch |
S | Weight | |
(Nm) | (Nm) |
Inner Race |
Outer Race |
(cycle/min) |
Dia. (H7) |
(kg) | |||||||||||
MZ15 | 186 | 0.2 | 2200 | 900 | 150 | 15 | 5*2.3 | 62 | 68 | 60 | 58 | 47 | 25 | 5.5 | 6*M5*P0.8 | 10 | 1.4 |
MZ17 | 215 | 0.2 | 2000 | 800 | 150 | 17 | 5*2.3 | 66 | 75 | 64 | 64 | 52 | 28 | 6.3 | 6*M5*P0.8 | 10 | 1.8 |
MZ20 | 323 | 0.29 | 1900 | 700 | 150 | 20 | 6*2.8 | 67 | 80 | 65 | 68 | 55 | 30 | 7.6 | 6*M6*P1.0 | 12 | 2 |
MZ30-22 | 735 | 0.39 | 1800 | 500 | 150 | 22 | 6*2.8 | 82 | 100 | 80 | 88 | 75 | 45 | 8.9 | 6*M8*P1.25 | 16 | 3.7 |
MZ30-25 | 735 | 0.39 | 1800 | 500 | 150 | 25 | 8*3.3 | 82 | 100 | 80 | 88 | 75 | 45 | 8.9 | 6*M8*P1.25 | 16 | 3.7 |
MZ30 | 735 | 0.39 | 1800 | 500 | 150 | 30 | 10*3.3 | 82 | 100 | 80 | 88 | 75 | 45 | 8.9 | 6*M8*P1.25 | 16 | 3.7 |
MZ35 | 1080 | 0.49 | 1700 | 300 | 150 | 35 | 10*3.3 | 87 | 110 | 85 | 95 | 80 | 50 | 8.7 | 6*M8*P1.25 | 16 | 4.8 |
MZ45-40 | 1620 | 0.69 | 1700 | 300 | 150 | 40 | 12*3.3 | 92 | 125 | 90 | 110 | 95 | 60 | 8.4 | 8*M8*P1.25 | 16 | 6.2 |
MZ45 | 1620 | 0.69 | 1700 | 300 | 150 | 45 | 14*3.8 | 92 | 125 | 90 | 110 | 95 | 60 | 8.4 | 8*M8*P1.25 | 16 | 6.2 |
MZ60-50 | 2110 | 0.98 | 1600 | 250 | 150 | 50 | 14*3.8 | 102 | 155 | 100 | 140 | 125 | 80 | 9.1 | 8*M8*P1.25 | 16 | 10.2 |
MZ60-55 | 2110 | 0.98 | 1600 | 250 | 150 | 55 | 16*4.3 | 102 | 155 | 100 | 140 | 125 | 80 | 9.1 | 8*M8*P1.25 | 16 | 10.2 |
MZ60 | 2110 | 0.98 | 1600 | 250 | 150 | 60 | 18*4.4 | 102 | 155 | 100 | 140 | 125 | 80 | 9.1 | 8*M8*P1.25 | 16 | 10.2 |
MZ70-65 | 3040 | 1.27 | 1300 | 250 | 150 | 65 | 18*4.4 | 105 | 175 | 103 | 162 | 145 | 95 | 8.6 | 8*M8*P1.25 | 16 | 13.2 |
MZ70 | 3040 | 1.27 | 1300 | 250 | 150 | 70 | 20*4.9 | 105 | 175 | 103 | 162 | 145 | 95 | 8.6 | 8*M8*P1.25 | 16 | 13.2 |
Mounting Example