Competitive Price Hot Sale Bb Bb-1k Bb-2k Bb-2gd Bearing

• Customization: Available
• Transport Package: Single Box
• Specification: BB15-BB40
• Model NO.: BB BB-1K BB-2K BB-2GD
• Trademark: TN
• Origin: China
• HS Code: 84836000
• Production Capacity: 20000piece/Month

Product Description

Competitive Price Hot Sale Bb Bb-1k Bb-2k Bb-2gd Bearing
General information of Installation and usage for BB series Cam Clutch
1. BB series Cam Clutch is designed for press fit installation.
2. BB-1K-K and BB-2GD 1K-K series have a keyway on the inner race. Keyways, except size 25 are
manufactured to DIN 6885. 3, BB40-1K-K and BB40-2GD 1K-K are manufactured to DIN 6885. 1.
3. BB-2K-K series has a keyway on both the inner and outer race.
"-K" means keys shipped together with Cam Clutch.
4. Correct interference dimensions at the shaft and the housing must be maintained to obtain maximum bearing
and clutch performance.
5. Refer to the table on next page for tolerance of the shaft and housing for each series.
6. BB, BB-1K and BB-2K Clutches, bearing supported and delivered with grease have dust seal protection
against particles of 0.25mm and over, whereas BB-2GD and BB-2GD-1K clutches, 5mm wider than standard
BB series, have special lip seals for effective protection against any dust.
7. The arrow on the inner race shows the direction of inner race engaging.
8. To install the clutch, use a press tool of the appropriate diameter to apply even pressure over the entire face
of the inner and outer race.
9. Do not hammer or apply other shock to the clutch.
10. Make sure the housing has enough strength to withstand the pressure required for the press fitting installation
of the Clutch.
11. Operating temperature range: -30°C to +100°C (Consult us for the temperature that exceeds this range).
Catalogue for BB CAM CLUTCH 

Model	Torque Capacity	Max. Overrunning		Drag Torque (N·m)		A		B	C	D		r	Weight (g)		Bearing Loads
		Inner Race	Outer Race	BB BB-1K-K BB-2K-K	BB-2GD BB-2GD 1K-K	BB BB-1K-K BB-2K-K	BB-2GD BB-2GD 1K-K			BB BB-1K-K BB-2K-K	BB-2GD BB-2GD 1K-K		BB BB-1K-K BB-2K-K	BB-2GD BB-2GD 1K-K	Cr	Cor
	N·m	r/min	r/min												N	N
BB15	29	3600	2000	0.01	0.04	11	16	35	15	32.6	32.45	0.6	50	70	5950	3230
BB17	43	3500	1900	0.01	0.05	12	17	40	17	36.1	36.45	0.6	80	100	7000	3700
BB20	61	3000	1600	0.014	0.055	14	19	47	20	41.7	42.35	1	120	150	8500	4900
BB25	78	2500	1400	0.017	0.055	15	20	52	25	47.1	47.05	1	150	200	10700	6300
BB30	140	2000	1100	0.03	0.058	16	21	62	30	56.6	55.6	1	230	280	11900	7900
BB35	173	1800	1000	0.034	0.06	17	22	72	35	64	64.6	1.1	320	410	13500	9700
BB40	260	1800	900	0.04	0.08	22	27	80	40	71	71.6	1.1	400	600	14500	11700

Note: Model No. marked on the inner race is only "K" for both "1K" and "2K". (Example: the mark "BB25-K" for both BB25-1K and BB25-2K)

Pictures 




 

Reference Model CSK  
Type CSK is a sprag type freewheel integrated into a 62 series ball bearing(except sizes 8 and 40).

Including: CSK8(KK8 BB8) CSK12(KK12 BB12) CSK15(KK15 BB15) CSK20(KK20 BB20) CSK25(KK25 BB25) CSK30(KK25 BB25) CSK35(KK35 BB35) CSK40(KK40 BB40).

It is bearing supported, delivered grease lubricated and protected against dust of more than 0, 3mm. The use of additional "nylos" type seals is recommended especially when the working temperature exceeds 50° , COil bath lubrication is also possible. All the CSK versions are equipped with "formchromed" sprags. This process increases several times the overrunning life time. Torque transmission is ensured by a press fit assembly into a rigid outer housing with N6 tolerance, and onto a shaft with n6 tolerance. The initial bearing radial clearance is set at C5, and is reduced if using the press fit as specified. Please contact us when either the ambient orthe operating temperature is not within the range +5° , C to +60° .

CSK. 2RS is 5 mm widerbut is equipedwith lip seals to be water splash resistant.

Type			Size mm			Drag torque Tkn(N.m)	Weight(KG)
DTB	GERMANY	JAPAN	d(inside dimension)	D(outside dimension)	B(thickness)
CSK8	CSK8		8 *	22	9	2.5	0.015
CSK12	CSK12		12	32	10	7.5	0.04
CSK15	CSK15	BB15	15	35	11	13.5	0.05
CSK17	CSK17	BB17	17	40	12	24.5	0.07
CSK20	CSK20	BB20	20	47	14	40	0.11
CSK25	CSK25	BB25	25	52	15	68	0.14
CSK30	CSK30	BB30	30	62	16	110	0.21
CSK35	CSK35	BB35	35	72	17	140	0.3
CSK40	CSK40	BB40	40	80	22	260	0.5
CSK8-2RS	CSK8-2RS		8 **	22	9	2.5	0.015
CSK12-2RS	CSK12-2RS		12	32	14	7.5	0.05
CSK15-2RS	CSK15-2RS	BB15-2GD	15	35	16	13.5	0.07
CSK17-2RS	CSK17-2RS	BB17-2GD	17	40	17	24.5	0.09
CSK20-2RS	CSK20-2RS	BB20-2GD	20	47	19	40	0.145
CSK25-2RS	CSK25-2RS	BB25-2GD	25	52	20	68	0.175
CSK30-2RS	CSK30-2RS	BB30-2GD	30	62	21	110	0.27
CSK35-2RS	CSK35-2RS	BB35-2GD	35	72	22	140	0.4
CSK40-2RS	CSK40-2RS	BB40-2GD	40	80	27	260	0.6

Company Details 
Changzhou Suma Precision Machinery Co., Ltd(Changzhou Tianniu Clutch Factory)is a manufacturer specialized in Producing Various cam clutch, one way bearing, one way clutch, backstop clutch, overrunning clutch and other bearings with high technology. 

FAQ: 
Q: How do you pack the BB cam clutch ?

A: Usually BB cam clutch are packed in the wooden box. It can be done as your specfic demands.

Q: Can i get the samples of BB cam clutch from you?

A: It is highly encouraged to ask for the samples for quality check. 

Q: Can you promise to deliver the BB cam clutch in time?

A: Credit always ranks the top on the list. We will absolutely deliver the goods in 10 days after your order is confirmed.