Sprag Type One Way Clutch Ck-L Series

Product Details
Customization: Available
Certification: ISO9001:2008
Style: With Outer Ring
Manufacturer/Factory & Trading Company

360° Virtual Tour

Diamond Member Since 2014

Suppliers with verified business licenses

Audited Supplier

Audited by an independent third-party inspection agency

High Repeat Buyers Choice
More than 50% of buyers repeatedly choose the supplier
Years of Export Experience
The export experience of the supplier is more than 10 years
Exhibition Experience
The supplier had participated in offline trade shows, you can check the Audit Report for more information
Quality Assurance
The supplier provides quality assurance
to see all verified strength labels (23)
  • Sprag Type One Way Clutch Ck-L Series
Find Similar Products

Basic Info.

Model NO.
CK-L
Rows Number
Single
Load Direction
Radial Bearing
Material
Gcr15
Model
Ck-L
Type
Sprag Type
Weight
0.58-6.00kg
Seals Type
Sealed
Precision
P6
OEM
Accept
Stock
Rich
Delivery
10-15days
Transport Package
Industry Packing
Specification
P6
Trademark
SUMA or OEM
Origin
Changzhou, Jiangsu, China
HS Code
84836000
Production Capacity
10000PCS/Month

Product Description

Product Model: CK-L

Installation and Usage
1. Concentricities of the inner race and the outer race are maintained by the plain bearing located between the outer race and the shaft. Radial load which works on the outer race is also supported by this plain bearing. The shaft must therefore be extended through the clutch outer race end.
2. Do not use the PB Series Cam Clutch as a coupling. Use with a flexible coupling when connecting two shafts.
3. Specify right (RH) or left hand (LH) inner race drive viewed from the end marked by the arrow in the illustration Above. Check if the rotation of the clutch is correct before being run-in.
4. For indexing use, oil lubrication is recommended.
5. Key to be used should be in accordance with JIS B1301-1959
6. Thrust load should be supported by other devices, not by the Cam Clutch.
7. The bore of the driven member, such as the sprocket on the clutch outer race, should meet H6 or H7 tolerance of the JIS standard.
  Nm
r/min
mm
kg
    d
H7
d1F8 D D1
h7
F H L m n bw×tw bn×tn
CK-L1560 86 1260 765 15 15 60 26 25 32 70 1.3 21 4×2.5 4×1.5 0.58
CK-L2072 225 1050 680 20 20 72 38 33 38 82 1.7 29 6×3.5 6×2.8 1.17
CK-L2585 330 840 552.5 25 25 85 45 33 40 85 1.7 28 14×4.5 8×3.3 1.67
CK-L3085 330 840 550 30 30 85 48 35 35 85 1.7 31 8×4 8×3.3 1.78
CK-L3095 490 700 340 30 30 95 60 37 41 92 2.2 30 8×4 8×3.3 2.50
CK-L40115 900 560 255 40 40 115 65 37 50 100 2.7 30 12×5 12×3.3 3.60
CK-L45135 1240 490 255 45 45 135 75 41 54 112 2.7 35 14×5.5 14×3.8 6.00
 

Send your message to this supplier

*From:
*To:
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now
Contact Supplier