High Quality Sprag One Way Clutch Fe 453 Fe458 Fe463 Fe478
Freewheel-clutches transmit or support torque moment by friction contact in one direction and permit idling in the opposite direction.
Freewheel-clutches are used as:
Indexing elements to change from oscillating to intermittent rotary motion.
Backstops to prevent self reversing due to load condition when the machine is not activated.
Overrunning clutches to maintain driven unit activated even during slowdown, or in the case of two speed operation
(by independent motors) to switch to the higher speed by passing the slower.
A large quantity of freewheel-clutches with varying design features and dimensions are available, depending on requirements such as: Torque, indexing frequency, idling speed and environment.
The supporting equipment around the clutch has to be built accurately and of high quality for the clutch to operate properly This is why we offer support units or complete assemblies of freewheel clutches.
Lubrication is especially important to obtain maximum life of freewheel clutches.
Good lubrication decreases drag. Please refer to our Lubrication Selection Table for proper selection.
Clutches (except the sealed
Clutches of series FND, FPD, FK 62...-RS, FK 62...-2RS, FKN...-RS
And FKN...-2RS) are shipped rustprotected not lubricated.
For extreme applications, please consult with our technical staff.
FE448 FE443 FE422 FE423 FE428 FE427 FE432 FE433 FE453 FE437 in stock.
){kind=link}