Mi600 Truck Bearing One Way Bearing From China Manufacturer

• Customization: Available
• Feature: Vacuum
• Style: Without Inner Ring
• Model NO.: MI600
• Load Direction: Radial Bearing
• Material: Bearing Steel
• Model: Mi600
• Torque Capacity: 3140nm
• Inner Race Overrunning Speed: 50r/Min
• Max Indexing: 300cycle/Min
• Inner Diameter: 50mm
• Outer Diameter: 136mm
• Keyway: 12X3.5(mm)
• Width: 95mm
• Wight: 8.6kg
• OEM: Accept
• Transport Package: Industry Packing
• Specification: mg, ma, mi, mo, mr
• Trademark: SUMA or OEM
• Origin: Changzhou
• HS Code: 84836000
• Production Capacity: 10000PCS/Year

Product Description

                       MI600 truck bearing one way bearing from China manufacturer

Intorduction
Type MG, MI, MO, MR is a sealed, sprag type freewheel, bearing supported using two 60...ZZ series grease lubricated bearings.
Units are delivered grease lubricated ready for installation. SMZ units are intended as multipurpose, to be used in various applications. The inner race is keyed to the shaft. The inside diameter of the outer race (dimension D4) should be used as the mounting register for the connected parts (sprocket, pulley, gear,
Torque arm...).

Feature
1.MG Series Cam Clutch is used for inner race overrunning applications. MI Series Cam Clutch is used for indexing applications
2. For attaching a pulley, a gear, or sprocket to the clutch, insert the clutch into the hub of the device, and screw the bolts (high tension) into the tapped holes on the clutch end. The tolerance bore of the hub should be H6 or H7 of JIS standard
3. Recommended shaft tolerances are as follows:
4. The key should be in accordance with JIS B1301-1959. However, for M750 and above models, a key is attached.
5. Use only a parallel key to secure the clutch. Never use a tapered key.
6. If the clutch receives shock loads or is designed for use at full torque capacity, it is better to use a
hardened key and shaft.
7. Allow for a clearance between the top of the clutch keyway and the top of the key for pressure ventilation of the clutch in the case of MG Series. A pressure ventilation hole is provided on the keyway of the clutch inner race.
8. When mounting the clutch on a shaft, apply pressure to the inner race, but never to the outer race.
9. Thrust load should be taken up by other devices, not by the Cam Clutch.
10.When using MG Series at medium and high speeds, pay attention to heating. Longevity is shortened if
the temperature of Cam Clutch outer race rises to over 70°C. In case of continuous over running
Please contact Tubaki. In this case, use a different model or provide an oil bath or forced lubrication.
11.Oil is not sealed in at the time of shipment. Supply an appropriate amount of oil before use.
12.When placing an order for MG Series Cam Clutch model MG 750 and above, please inform of the overrunning speed you use.
13.For vertical mounting, please consult .

Different Sizes for Your Reference
dimensions in mm

Model	Torque Capacity (N@m)	Drag Torque (N@m)	Max. Overrunning (r/min)		Max. Indexing (cycle/min)	Bore  Size		A	B	C	PCD	E
			Inner  Race	Outer  Race		Dia. (H7)	Keyway		(h7)		D
MG 300 MI  300	314	0.23 0.31	2800 50	900 _	_ 300	19	5x2	63	77	60	66	10.4
MG  400 MI    400	539	0.29 0.38	2600 50	800 _	_ 300	22	5x2	70	88	67	73	10.7
MG  500 MI   500	1620	0.51 0.68	2400 50	800 _	_ 300	31.5	7x3	89	108	86	92	12.3
MG  600 MI   600	3140	0.85 1.54	2100 30	700 _	_ 300	50	12x3.5	95	136	92	120	12.8
MG  700 MI   700	5880	1.70 2.63	1500 30	500 _	_ 300	70	18x6	127	180	124	160	19.8
MG  750 MI   750	9500	3.43 4.12	1800 30	600 _	_ 300	85	24x6	153	200	150	175	75
MG  800 MI   800	17600	5.39 8.33	1300 20	475 _	_ 300	110	28x7	158	250	155	220	77.5
MG  900 MI   900	24500	6.77 9.41	1200 20	400 _	_ 300	135	35x9	165	300	160	265	80
MG  1000 MI   1000	33800	8.14 12.74	1200 20	325 _	_ 300	160	38x10	188	370	180	325	90
MG  1100 MI    1100	78400	15.00 22.15	350 20	_ _	_ 150	185	45x14	260	470	250	415	125
MG  1200 MI    1200	95100	17.64 27.54	300 20	_ _	_ 150	200	45x14	260	500	250	440	125
MG  1300 MI    1300	176000	18.72 28.13	250 20	_ _	_ 150	250	56x17.5	280	600	260	530	130

Company Information
Changzhou Suma Precision Machinery Co., Ltd(Changzhou Tianniu Clutch Factory)is a manufacturer specialized in Producing Various cam clutch, one way bearing, one way clutch, backstop clutch, overrunning clutch and other bearings with high technology.

We are following "Best Quality, Best Price, Fast Delivery, Best Serves" to make all of our old and new customers satisfied. 
Our Advantages
1. Advanced producing equipment.
2. Strict requirement for the raw material
3. Complete&perfect process flow
4. Good quality of each batch of the product
5. Different grades of price for different quality

FAQ
Q: Why do we choose your company?
A: We always insist quality first. We have our bearing factory, therefore we have advantage in quality control and price of one way clutch bearing.
 
Q:What is the delivery time?
A: Most of the bearing we have stock. For small quantity, we will arrange delivery within 15 days.
 
Q: What is your payment term?
A: Our payment term include L/C, T/T, Western Union, Paypal etc.
 
Q: Can you send bearing samples first?
A: Yes, we can send bearing samples of one way clutch bearing to check quality first.

If you have any needs,pls contact me at any time!