Backstop Clutch for Gearbox Gc-D

• Model: Gc-D
• Torque Capacity: 12-4370n@M
• Inner Race: 650-1550r/Min
• Outer Race: 975-3000r/Min
• Precision: P6
• OEM: Accept
• Model NO.: GC-D
• Pakage: Single Box or as Your Requirements
• Port: Shanghai;Ningbo
• Delivery: 10-15days
• Export: Worldwide
• Transport Package: Single Box or as Your Requirements
• Specification: P6
• Trademark: SUMA or OEM
• Origin: Changzhou, Jiangsu, China
• HS Code: 84836000
• Production Capacity: 10000PCS/Year

Product Description

Product Model: GC-D

Type GC-D is a roller type freewheel non-bearing supported. Bearings are required to support axial and radial loads. Lubrication and sealing must also be provided by the installation.
A typical arrangement is to install this type alongside a bearing within the same location tolerances, as shown on the following page. The inner race is keyed to the shaft.
The outer race has positive n6 tolerance, to give a press fit in a H7 housing. Additional side notches in the outer race provide for positive torque transmission.
If the housing is to K6 tolerance, use of the notches is not necessary, but the housing must be strong enough to not expand after assembly. This design can accept an axial misalignment of inner and uter race of ± S/2.

TYPE	N@m	r/min		mm						kg
		inner race	outer race	d(H7)	D(h7)	F	L	n-d 1	b n ×t n
GC-D1247	12	1550	3000	12	47	38	20	3-5.5	4×1.8	0.21
GC-D1555	42	1150	2700	15	55	45	30	3-5.5	5×2.3	0.44
GC-D2068	111	1000	1800	20	68	58	34	4-5.5	6×2.8	0.70
GC-D2590	215	850	1300	25	90	78	37	6-5.5	8×3.3	1.30
GC-D30100	380	750	1050	30	100	87	44	6-6.6	8×3.3	2.00
GC-D35110	547	650	975	35	110	96	48	6-6.6	10×3.3	2.60
GC-D40125	760	600	850	40	125	108	56	6-9.0	12×3.3	3.90
GC-D45130	855	525	750	45	130	112	56	8-9.0	14×3.8	4.00
GC-D50150	1634	475	650	50	150	132	63	8-9.0	14×3.8	6.00
GC-D55160	1995	425	600	55	160	138	67	8-11	16×4.3	7.20
GC-D60170	2660	400	550	60	170	150	78	10-11	18×4.4	9.20
GC-D70190	4370	325	450	70	190	165	95	10-11	20×4.9	11.8